Skip to content
Cowint DTF film roll

DTF Film Rolls: Choosing 13-Inch or 24-Inch Film for Your Printer

By the Impact USA technical team

Ordering DTF film looks simple until the roll arrives and doesn't fit. Width, core size, peel type and coating all have to match your printer and your workflow. This guide covers how to choose between 13-inch and 24-inch DTF film rolls, what else to check on the label before you order, and when sheets or specialty films make more sense. If you're still deciding on peel style, our full hot peel vs instant peel DTF film comparison goes deeper on that choice.

Cowint double-sided hot-peel DTF film rollCowint double-sided matte instant-peel DTF film roll

Start with your printer's media width

DTF printers are built around a fixed media width, and the film has to match it. The two most common sizes are:

  • 13-inch film (about 33 cm) for desktop and A3-class DTF printers, like the machines in our 13-inch desktop DTF printers collection.
  • 24-inch film (about 60 cm, often listed as 23.6 or 23.62 inches) for production roll-to-roll printers, like those in our 24-inch DTF printers collection.

A roll that's too narrow wastes printable width and can throw off your RIP layouts. A roll that's too wide won't load. Check your printer's manual or measure the media path before you order. Your powder shaker also needs to handle the same width, so check that too.

What to check on the label besides width

Roll length and core size

Most of our standard rolls are 100 meters, or about 328 feet. Core size matters more than people expect. Our Cowint rolls, for example, list a 3.25-inch inner core and a 5.5-inch outer diameter. Make sure your printer's take-up and supply holders accept that core before you switch brands.

Thickness

Our main Impact and Cowint rolls are listed at 75 microns. Changing to a film of a different thickness can affect how it feeds through the pinch rollers and the shaker, so test a roll before you commit to a new film.

Single-sided or double-sided matte

Double-sided matte film is coated or treated on both sides. Our Impact listings say the treated back side reduces static and slippage, which helps with powder residue and feeding. Always print on the coated printing side. Single-sided films are available too, such as the Cowint single-sided hot-peel film in 23.62 inches.

Peel type

Hot peel film is pulled while the transfer is still hot. Instant peel film is designed to peel right after pressing without a long wait. Neither is better for every shop. Pick the one that matches how your team already works, then test on the garments you actually sell.

13-inch options we stock

24-inch options we stock

Listed press settings

Always start with the settings on the film's listing, then test on your own garments and heat press.

  • Cowint 13-inch hot peel and instant peel: shaker cure at 300 to 315°F for about 1 minute, then press at 300 to 320°F for 5 seconds at medium pressure.
  • Impact 13-inch hot peel: press at 300 to 320°F for 5 to 15 seconds at medium pressure.
  • Impact 13-inch instant peel: press at 285 to 320°F for 5 to 10 seconds at medium pressure.

For more on dialing in your press, see our DTF heat press settings guide.

When sheets or specialty films make sense

If you only print occasionally or test designs on a small printer, A3 DTF film sheets can be easier to handle than a full roll. For special effects, our DTF specialty films include glitter, glow-in-the-dark, foil and reflective films. Many come in shorter rolls in 11.8-inch and 23.6-inch widths, so check the width against your printer.

Film ordering checklist

  1. Confirm your printer's media width: 13-inch or 24-inch.
  2. Confirm your shaker handles the same width.
  3. Check that the core size fits your supply and take-up holders.
  4. Pick hot peel or instant peel to match your workflow.
  5. Choose single-sided or double-sided matte.
  6. Note the listed press settings and test before a production run.
  7. Store unopened rolls sealed, flat and away from humidity and heat.

Storage matters more than most shops expect. Our guide to storing DTF film explains how to keep rolls in good shape.

Frequently asked questions

Store-written FAQs from the Inkjet Parts team, not customer submissions.

Can I use 24-inch film on a 13-inch printer?
No. A roll wider than your printer's media path won't load. Order the width your printer is built for.
Is 23.62-inch film the same as 24-inch film?
They're both 24-inch class rolls. 23.62 inches is 60 cm. Check your printer's maximum media width to be sure it fits.
Should I buy hot peel or instant peel film?
Choose by workflow. Our hot peel vs instant peel comparison walks through the differences.
Can I return a roll of film?
Our policy allows returns within 30 days. Call 844-571-8171 before sending anything back so we can confirm the item qualifies.

Shop DTF film

Browse all DTF film, the Cowint DTF film and powder collection, or the full range of DTF ink, film and powder. Not sure which roll fits your printer? Call our technical team at 844-571-8171 with your printer model. Orders placed before 3:45 PM PT ship the same day from Ontario, California.

Previous article Sublimation Ink Buying Guide for Wide-Format Printers
Next article 7 Signs Your Mimaki JV150 Capping Station Needs Replacing

Leave a comment

Comments must be approved before appearing

* Required fields

Shop this

Shop DTF supplies
Customer Reviews