Skip to content

Mimaki Printer Parts

Shop Mimaki parts for JV33, JV5, CJV30, JV150, JV300, CJV150, TS300P and TxF150-75 printers: OEM printheads plus dampers, cap tops, wipers, pumps and cables, each listed with its Mimaki part number. Find your model in the guide below or call 844-571-8171.

Filters

Printer Cleaning Swabs - ( 100 pcs )

Original price $ 17.99
Original price $ 17.99 - Original price $ 17.99
Original price $ 17.99
Current price $ 12.99
$ 12.99 - $ 12.99
Current price $ 12.99

Fits: DTF printers Printer cleaning swabs are used to manually clean print heads, cap tops and wiper blades. Print head cleaning swabs are intended...

View full details

Mimaki JV33 / JV5 Capping Station Cap Top - MP-M905240

Original price $ 54.99 - Original price $ 54.99
Original price
$ 54.99
$ 54.99 - $ 54.99
Current price $ 54.99

This Mimaki JV33 / JV5 Cap top - MP-M905240 is suitable for most Mimaki printers including the CJV150 / 300 and JV150 / JV300. Mimaki cap tops can ...

View full details

Mimaki DX5 Damper MP-M006579 for JV33, JV5 & CJV30

Original price $ 14.99 - Original price $ 14.99
Original price
$ 14.99
$ 14.99 - $ 14.99
Current price $ 14.99

Mimaki JV33 Dampers should be replaced every year to maintain optimum printer performance. Works with waterbase and eco solvent inks. This is the b...

View full details

Eco Solvent Cleaning Solution 1 Liter

Original price $ 45.00 - Original price $ 45.00
Original price
$ 45.00
$ 45.00 - $ 45.00
Current price $ 45.00

Impact USA solvent cleaner is suitable for use on all Roland, Mutoh, Mimaki, and Epson printers using Eco-Solvent ink. This is a replacement for SP...

View full details

60cc Inkjet Syringe - 44512

Original price $ 8.00 - Original price $ 8.00
Original price
$ 8.00
$ 8.00 - $ 8.00
Current price $ 8.00

60 cc Inkjet syringe for use with water based printers. This syringe is used to pull ink into Mimaki & Mutoh dampers or pull directly from the ...

View full details

Mimaki JV150-300 / CJV150 Cap top - OEM

Original price $ 54.99 - Original price $ 54.99
Original price
$ 54.99
$ 54.99 - $ 54.99
Current price $ 54.99

OEM Mimaki cap top, part MP-M905240, for Mimaki JV150 / JV300 and CJV150 / CJV300 printers, plus the JV33, JV5, CJV30 and other models listed below...

View full details

Mimaki JV33 / JV5 / CJV-150 Wiper Blade Single SPA-0134

Original price $ 3.95 - Original price $ 3.95
Original price
$ 3.95
$ 3.95 - $ 3.95
Current price $ 3.95

Mimaki wiper blades can easily be inserted into the plastic wiper holders. Wipers should be replaced every 1 - 3 months depending on how often the ...

View full details

Mimaki JV33 / JV5 Pump - M004868 OEM

Original price $ 99.00 - Original price $ 99.00
Original price
$ 99.00
$ 99.00 - $ 99.00
Current price $ 99.00

This is the pump for the JV3, JV33, CJV30, JV34 and JV5 printers. Mimaki pumps should be replaced ever 6-12 moths depending on usage. CJV30-10...

View full details

Printer Rail Grease 2 oz

Original price $ 19.99 - Original price $ 19.99
Original price
$ 19.99
$ 19.99 - $ 19.99
Current price $ 19.99

Fits: DTF printers Inkjet Parts THK rail grease is for lubrication of printer carriage rails. Formulated to the correct manufacturer specified weig...

View full details

Mimaki JV150 - 300 / CJV150 - 300 160 Damper - M015001

Original price $ 97.00 - Original price $ 97.00
Original price
$ 97.00
$ 97.00 - $ 97.00
Current price $ 97.00

Mimaki JV150 - 300 / CJV150 - 300 160 Damper should be replaced every year to maintain optimum printer performance. Part # M015001 CJV150-107 ...

View full details

Mimaki JV and CJV 150/300 Series Cap Sponges (CP Pad Assy) SPA-0257

Original price $ 59.00 - Original price $ 59.00
Original price
$ 59.00
$ 59.00 - $ 59.00
Current price $ 59.00

This Cap Pad Set 2 is suitable for Mimaki JV150, JV300, CJV150, CJV300 & TxF150-300 printers. This is the original Mimaki part (number SPA-0257...

View full details

Mimaki JV33 / CJV30 Cap Pad SPA-0161

Original price $ 4.99 - Original price $ 4.99
Original price
$ 4.99
$ 4.99 - $ 4.99
Current price $ 4.99

Mimaki JV33 / CJV30 Cap Pad SPA-0161 Reusable. CJV30-100 CJV30-100BS CJV30-130 CJV30-130BS CJV30-160 CJV30-160BS CJV30-60 CJV30-60BS JV33-...

View full details

Mimaki Permanent Chips CMYK SS21 JV150-300 / CJV150-300

Original price $ 89.00 - Original price $ 89.00
Original price
$ 89.00
$ 89.00 - $ 89.00
Current price $ 89.00

Mimaki SS21 Permanent Chips CMYK Set of 4. Printer Compatibility:  Mimaki CJV150-75 Mimaki CJV150-107 Mimaki CJV150-130 Mimaki CJV150-160 Mimak...

View full details

Inkjet Parts Bulk Ink System for Mimaki, Mutoh & Roland, 4 Tanks & 8 Cartridges

Original price $ 295.00 - Original price $ 295.00
Original price
$ 295.00
$ 295.00 - $ 295.00
Current price $ 295.00

The Mimaki Mutoh Roland Bulk Ink System can be used with sublimation, solvent and other water based printers. This system comes with 4 tanks, 8 car...

View full details

Mimaki TxF150-75 DTF Cap top MP-M905240

Original price $ 52.00 - Original price $ 52.00
Original price
$ 52.00
$ 52.00 - $ 52.00
Current price $ 52.00

This cap top, part number MP-M905240, is for Mimaki TxF150-75 DTF printers. The cap seals the printhead when the printer is idle so ink doesn't dry...

View full details

Soft Tubing 1ft

Original price $ 8.00 - Original price $ 8.00
Original price
$ 8.00
$ 8.00 - $ 8.00
Current price $ 8.00

Fits: all printers Soft Tubing — 1 Foot LengthKeep your inkjet printer's ink delivery system running smoothly with this flexible soft tubing. Desig...

View full details

Mimaki JV33 / JV5 Joint Valve

Original price $ 9.99 - Original price $ 9.99
Original price
$ 9.99
$ 9.99 - $ 9.99
Current price $ 9.99

Joint valve for Mimaki JV33 / JV5 series ink lines The Mimaki JV33 / JV5 Joint Valve is a joint valve in the ink line that opens or closes flow bet...

View full details

Mimaki Head Cable FFC Universal DX5 31 Pin

Original price $ 4.99 - Original price $ 4.99
Original price
$ 4.99
$ 4.99 - $ 4.99
Current price $ 4.99

These cable connect the Mimaki JV33, JV5, CJV30 DX5 print head to the slider board. 1 cable. The Mimaki Head Cable FFC Universal DX5 31 Pin is a f...

View full details

3mm Ink Line Splitter Y

Original price $ 9.99 - Original price $ 9.99
Original price
$ 9.99
$ 9.99 - $ 9.99
Current price $ 9.99

Fits: all printers 3mm Ink Line Splitter Y. The 3mm Ink Line Splitter Y is a Y-style ink-line fitting that joins or splits 3 mm ink tubing in the s...

View full details

Mimaki PE Hard Ink Tube 2mm ID 3mm OD - 1 meter- SPA-0144

Original price $ 4.99 - Original price $ 4.99
Original price
$ 4.99
$ 4.99 - $ 4.99
Current price $ 4.99

This Mimaki ink line is meant to replace the inline ink tubing in Mimaki JV33 / JV5 / JV300. Ink line will NOT be cut per meter it will be a comple...

View full details

Mimaki TxF150-75 Damper MP-M022253

Original price $ 79.00 - Original price $ 79.00
Original price
$ 79.00
$ 79.00 - $ 79.00
Current price $ 79.00

This damper, part number MP-M022253, is for the Mimaki TxF150-75 DTF printer. The damper sits between the ink line and the printhead, steadying ink...

View full details

Mimaki JV33 / JV34 Fuse - 0453.375MR

Original price $ 4.99 - Original price $ 4.99
Original price
$ 4.99
$ 4.99 - $ 4.99
Current price $ 4.99

Fuse for Mimaki JV33 series printers. The Mimaki JV33 / JV34 Fuse - 0453.375MR is a replacement fuse for the circuit named in the title. Swap it wh...

View full details

Mimaki DX5 Printhead M007947 for JV33 & JV5, with Memory Board

Original price $ 2,149.00 - Original price $ 2,149.00
Original price
$ 2,149.00
$ 2,149.00 - $ 2,149.00
Current price $ 2,149.00

OEM Mimaki DX5 printhead, part M007947, with head ID and memory board, for Mimaki JV33, JV5 and CJV30 series printers. The Mimaki JV33 / JV5 Print ...

View full details

Mimaki TxF150-75 DTF Wiper Blade 33S

Original price $ 4.99 - Original price $ 4.99
Original price
$ 4.99
$ 4.99 - $ 4.99
Current price $ 4.99

The Mimaki wiper blades can easily be inserted into the plastic wiper holders. Wipers should be replaced every 1 - 3 months depending on how often ...

View full details

Mimaki Cutter Blade Only SPA0064

Original price $ 19.99 - Original price $ 19.99
Original price
$ 19.99
$ 19.99 - $ 19.99
Current price $ 19.99

Mimaki Cutter Blade Only  JV33 / JV5 / JV300 / JV150 The Mimaki Cutter Blade Only SPA0064 cuts the media when the printer's cutter is fired. Replac...

View full details

Mimaki JV33 / JV5 Cap Tubing 1ft - 55685

Original price $ 15.00 - Original price $ 15.00
Original price
$ 15.00
$ 15.00 - $ 15.00
Current price $ 15.00

Mimaki JV33 / JV5 Cap Tubing 1ft. Overtime your JV33 / JV5 cap tubing becomes old and will start to slip off the captop. New tubing is recommend ye...

View full details

Mimaki Permanent Chips CMYK ES3 JV-150-300 / CJV-150-300

Original price $ 49.00 - Original price $ 49.00
Original price
$ 49.00
$ 49.00 - $ 49.00
Current price $ 49.00

Mimaki ES3 Permanent Chips CMYK Set of 4. Printer Compatibility:  Mimaki CJV150-75 Mimaki CJV150-107 Mimaki CJV150-130 Mimaki CJV150-160 Mimaki CJ...

View full details

Mimaki JV300 / JV150 Printhead NO Memory Board M015372

Original price $ 2,345.00 - Original price $ 2,345.00
Original price
$ 2,345.00
$ 2,345.00 - $ 2,345.00
Current price $ 2,345.00

The Mimaki JV300 / JV150 Printhead can be used with the following.  There is not memory board or cables.  CJV150-75, CV150-107, CJV150-130, CJV150...

View full details

Mimaki JV33 / JV5 / JV300 Ink Chip Emulator Board - 68874

Original price $ 0.00 - Original price $ 0.00
Original price $ 0.00
$ 499.00
$ 499.00 - $ 499.00
Current price $ 499.00

Ink Chip Emulator Board allows you to replace ALL of the original ink chips on Mimaki printers. The Emulator Board actually emulates the original i...

View full details

Mimaki TxF150-75 DTF Printhead M015372 with Cables & Memory Board

Original price $ 2,895.00 - Original price $ 2,895.00
Original price
$ 2,895.00
$ 2,895.00 - $ 2,895.00
Current price $ 2,895.00

Mimaki TxF150-75 DTF Printhead M015372 with Cables & Memory Board. Match the existing part number before ordering a direct replacement. Key Fe...

View full details

Mimaki JV300 / JV150 Fuse 6.3A

Original price $ 4.99 - Original price $ 4.99
Original price
$ 4.99
$ 4.99 - $ 4.99
Current price $ 4.99

6.3A fuse for Mimaki JV300 / JV150 series printers The Mimaki JV300 / JV150 Fuse 6.3A is a replacement fuse for the circuit named in the title. Swa...

View full details

JV33 - 160 Linear Encoder Scale E300353

Original price $ 89.00 - Original price $ 89.00
Original price
$ 89.00
$ 89.00 - $ 89.00
Current price $ 89.00

This Linear Encoder Scale is suitable for most Roland and Mimaki JV33, JV150, JV300 and CJV printers The JV33 - 160 Linear Encoder Scale E300353 gi...

View full details

JV300 / JV150 / CJV MP-E301141 Head FFC assy.

Original price $ 79.00 - Original price $ 79.00
Original price
$ 79.00
$ 79.00 - $ 79.00
Current price $ 79.00

The Mimaki Head FFC Assembly MP-E301141 is the flat flexible cable (FFC) that connects the printhead to the carriage board on Mimaki JV300, JV150, ...

View full details

3mm Single Ink Line Splitter 1 to 1

Original price $ 9.99 - Original price $ 9.99
Original price
$ 9.99
$ 9.99 - $ 9.99
Current price $ 9.99

Fits: all printers 3mm Single Ink Line Splitter 1 to 1 The 3mm Single Ink Line Splitter 1 to 1 is a Y-style ink-line fitting that joins or splits 3...

View full details

Mimaki Permanent Chips CMYK SS21 CJV-30 / JV33

Original price $ 89.00 - Original price $ 89.00
Original price
$ 89.00
$ 89.00 - $ 89.00
Current price $ 89.00

Mimaki SS21 Permanent Chips CMYK Set of 4. Printer Compatibility:  Mimaki CJV30-60 Mimaki CJV30-100 Mimaki CJV30-130 Mimaki CJV30-160 Mimaki JV...

View full details

Mimaki JV300 / JV150 Printhead with Cables & Memory Board OEM MP-M015372

Original price $ 2,895.00 - Original price $ 2,895.00
Original price
$ 2,895.00
$ 2,895.00 - $ 2,895.00
Current price $ 2,895.00

Mimaki JV300 / JV150 Printhead with Cables & Memory Board MP-M015372. Match the existing part number before ordering a direct replacement. OEM ...

View full details

Mimaki JV33 Media Paper Width Sensor SG113 Photo Sensor

Original price $ 24.00 - Original price $ 24.00
Original price
$ 24.00
$ 24.00 - $ 24.00
Current price $ 24.00

Mimaki JV33 Media Paper Width Sensor #SG113 The Mimaki JV33 Media Paper Width Sensor SG113 Photo Sensor is the media-width sensor that sees the ed...

View full details

Mimaki JV4 / JV3 / JV33 / JV5 Cap Sensor Photo Sensor OJ-6505-N2

Original price $ 44.00 - Original price $ 44.00
Original price
$ 44.00
$ 44.00 - $ 44.00
Current price $ 44.00

Mimaki JV4 / JV3 / JV33 / JV5 Cap Sensor Photo Sensor OJ-6505-N2 The Mimaki JV4 / JV3 / JV33 / JV5 Cap Sensor Photo Sensor OJ-6505-N2 is the cap s...

View full details

Mimaki Permanent Chips CMYK ES3 CJV-30 / JV33

Original price $ 49.00 - Original price $ 49.00
Original price
$ 49.00
$ 49.00 - $ 49.00
Current price $ 49.00

Mimaki ES3 Permanent Chips CMYK Set of 4. Printer Compatibility:  Mimaki CJV30-60 Mimaki CJV30-100 Mimaki CJV30-130 Mimaki CJV30-160 Mimaki JV3...

View full details

MP-M007389 Cap Assy.

Original price $ 154.00 - Original price $ 154.00
Original price
$ 154.00
$ 154.00 - $ 154.00
Current price $ 154.00

Fits: Mimaki JV33-130 / 160 / 260 (including BS), CJV30-60 / 100 / 130 / 160 (including BS), and TS3-1600 MP-M007389Cap Assy. The MP-M007389 Cap As...

View full details

Mimaki TS300P-1800 Damper -M017216

Original price $ 189.00 - Original price $ 189.00
Original price
$ 189.00
$ 189.00 - $ 189.00
Current price $ 189.00

Damper (#M017216) for Mimaki TS300P-1800 printers The Mimaki TS300P-1800 Damper -M017216 buffers ink on its way to the printhead, cutting down on p...

View full details

Mimaki CJV30 Pinch Roller Set (4 pcs) - SPA-0166

Original price $ 108.00 - Original price $ 108.00
Original price
$ 108.00
$ 108.00 - $ 108.00
Current price $ 108.00

CJV30 Pinch Roller Set (4 pcs) - SPA-0166 CJV30-60 CJV30-60BS CJV30-100 CJV30-100BS CJV30-130 CJV30-130BS CJV30-160 CJV30-160BS CJV150-75 CJV150-1...

View full details

MIMAKI Aqueous Washing Liquid Pack 2000ml SPC-0631

Original price $ 39.00 - Original price $ 39.00
Original price
$ 39.00
$ 39.00 - $ 39.00
Current price $ 39.00

MIMAKI SPC-0631 original clear liquid Compatible Ink Type Ac400  DD400  Rc210  Rc300  Rc400  Rc500  Sb210  Sb300  Sb410  Sb411  Sb420  Sb52  Sb53  ...

View full details

Mimaki JV4 / JV22 Waterbased Printhead (DX4)

Original price $ 695.00 - Original price $ 695.00
Original price
$ 695.00
$ 695.00 - $ 695.00
Current price $ 695.00

This is a OEM Mimaki JV4 / JV22 Waterbased Printhead (DX4) The Mimaki JV4 / JV22 Waterbased Printhead (DX4) is the printhead assembly that lays do...

View full details

TS300P-1800 HA812 Head P Assy

Original price $ 2,093.00 - Original price $ 2,093.00
Original price
$ 2,093.00
$ 2,093.00 - $ 2,093.00
Current price $ 2,093.00

TS300P-1800 HA812 Head P Assy The TS300P-1800 HA812 Head P Assy is the head assembly that carries the printhead on this printer. Replace it if the ...

View full details

Mimaki TS300P Print Head (MP-M015885)

Original price $ 1,998.00 - Original price $ 1,998.00
Original price
$ 1,998.00
$ 1,998.00 - $ 1,998.00
Current price $ 1,998.00

Mimaki ts300 printhead MP-M015885 HA812 Print Head for Mimaki TS300 TX300-1800 TX300P-1800 printer  The Mimaki TS300P Print Head (MP-M015885) jets ...

View full details

Mimaki Printer Parts buying guide

Shop Mimaki parts by printer model

Mimaki parts by type

Mimaki printheads (OEM)

Dampers and ink delivery

Capping, wiping and pumps

Cables, sensors, chips and fuses

  • Head FFC cables for DX5 (31-pin) and JV300 / JV150 (MP-E301141)
  • JV33 linear encoder scale E300353, paper-width sensor and cap sensor
  • SS21 and ES3 permanent chips and an ink chip emulator board
  • Fuses for JV33 / JV34 and JV300 / JV150

Cleaning and flushing

Which Mimaki part do I need?

  • Start with your model. JV33, JV5 and CJV30 use the DX5 head and MP-M006579 dampers. JV150 and JV300 use head M015372, and the JV150, JV300, CJV150 and CJV300 use M015001 dampers.
  • Match the part number. Every listing shows its Mimaki part number, so check it against the old part or your parts list.
  • Replace wear parts together. Cap tops, cap sponges and wiper blades wear with every cleaning cycle, so many shops replace them at the same time.

Ordering, returns and help

Unused parts in their original packaging can be returned within 30 days. Printheads and carriage and main boards are non-returnable unless pre-authorized; boards accepted for return carry a 30% restocking fee. Printheads carry no warranty. See the full return policy.

Not sure which part fits? Send us your printer model and the part number from your old part, or call 844-571-8171. Contact us.

Also see Roland printer parts and Mutoh printer parts.

Customer Reviews